iPRECIO™ MICRO INFUSION PUMP
Innovative Drug Infusion Technology for Laboratory Animals
iPRECIO™ Management Software - 4 steps
1. Input General Information of the study
Study Name, Number/ ID, Date, Animal Species, Strain, Age, Compound Name/ID, Concentration, Buffer Name, Administration Route, Number of Groups and Animals, etc.
2. Animal Groups Settings
# User input the concentration of solution and estimated maximum/minimum body weight expected of a subjected animal at the end of the study. Then the software automatically calculate the maximum/minimum dose which can be administered during the experiments.
# User select the combination of “Infusion Mode” and “Flow Rate Mode” and input the dose or flow rate of solution which will be administered.
** User can select the software types of “20 Groups x 20 Animals” or “50 Groups x 50 Animals”.
3. Advanced Settings of the Infusion/Flow Rate Modes
User program infusion protocol as infusion mode and flow rate mode for each animal/pump. Also user input Animal ID, Body Weight, Sex at this step.
4. Download of the Protocol Settings to the each Pump
Check the infusion protocol and schedule set for each animal/pump and download its protocol into the memory installed inside of the pump.
*Status Manager Window(Off-line monitoring)
You can confirm the administration schedule and the remaining volume of the pump reservoir, refill date, record the factual refill date, upload the log data of the pump.
Pump Automatic Recognition System
Each pump has a unique ID and Calibration factor in memory.
Therefore, the iPRECIO™ Management Software will recognize each pump when it is placed in the Pump Holding Device.